Menu
Lab Test
| S. No | TEST | METHOD | UNITS OF MEASURE |
| 1 | HTHS (High Temp / High Shear) | ASTM D5481 | cSt |
| 2 | 4 Ball Wear Test (Oil) | ASTM D5183 | no units |
| 3 | Acid Number | mod. ASTM D664 | mg KOH/g |
| 4 | Air Release | ASTM D3427 | minutes |
| 5 | Air Release Value | ||
| 6 | Aniline Point | ASTM D611 | Celsius |
| 7 | Base Number | mod. ASTM D4739 | mg KOH/g |
| 8 | Base Number by Perchloric Acid | ASTM D2896 | mg KOH/g |
| 9 | Brake Down Voltage (BDV) | ||
| 10 | Brookfield + Chiller (with Gelation Index-Scanning BF) | ||
| 11 | Carbon Residue (Conradson) | ASTM D189/IP13 | % |
| 12 | Cold Crank Simulator | ASTM D5293 | mPa·s |
| 13 | Color | ASTM D6045 | no units |
| 14 | Conomo / Sita – Foam Tester | ||
| 15 | Copper Corrosion | ASTM D130 | no units |
| 16 | Copper Corrosion | ||
| 17 | Copper Corrosion | ||
| 18 | Demulsibility (Water Separability) Tester | ||
| 19 | Density | ASTM D7777 | g/mL |
| 20 | Dielectric Strength | ASTM D877 | kV |
| 21 | Distillation-Boiling Range (IBP-FBP) | ||
| 22 | Distillation-Boiling Range (IBP-FBP) | ||
| 23 | Elemental Metals Analysis | mod. ASTM D5185 | ppm |
| 24 | Ferrography | ||
| 25 | Ferrography – Analytical | ASTM D7690 | picture |
| 26 | Fire Point | ||
| 27 | Flash Point – Cleveland Open Cup | ASTM D92 | Celsius |
| 28 | Foam Sequence I / II / III | ASTM D892 | mL/mL |
| 29 | Foaming Tendency | ASTM D892 | mL |
| 30 | FTIR – Full Spectrum Scan | FTIR | graph |
| 31 | FTIR (with library) + glycol | ||
| 32 | FTIR (with library) + glycol | ||
| 33 | Fuel Dilution % | ASTM D7593 | % |
| 34 | Fuel Dilution by GC | ||
| 35 | Furnace and Crucibles | ||
| 36 | Gravimetric Solids | Internal Method | ppm |
| 37 | HFRR | ||
| 38 | High Pressure Ion Chromatography (HPLC) – Chloride, Sulphate, Nitrite, Nitrate, Phosphate Detection | ||
| 39 | HTCBT | ||
| 40 | Humidity Cabinet – Salt Spray | ||
| 41 | Inductive Couple Plasma (ICP-AES) | ||
| 42 | IVF Quenchometer | ||
| 43 | KHTT (Komatsu Hot Tube Tester) | ||
| 44 | KRL | ASTM D | |
| 45 | Membrane Filtration | ||
| 46 | Micro Carbon Residue (MCRT) | ||
| 47 | Micro-Patch | Internal Method | picture |
| 48 | Microtap | ||
| 49 | Microtap | ||
| 50 | Milipore Apparatus | ||
| 51 | MRV | ASTM D4684 | cSt |
| 52 | MTM (friction test) | ||
| 53 | Nitration | ASTM E2412 | abs/0.1mm |
| 54 | NOACK | ASTM D5800 | % |
| 55 | Oxidation | abs/cm | |
| 56 | Particle Count Analyzer (NAS Class) – S4031 | ||
| 57 | Particle Count Analyzer (NAS Class) – SBSS | ||
| 58 | Particle Count (Calibration: ISO 11171) | ISO 4406 | counts/mL |
| 59 | Particle Quantifier (Ferrous Density) | Manufacturer | no units |
| 60 | PCT | ||
| 61 | P-DSC | ||
| 62 | Pentane Insolubles (Coagulated) / UnCoag. | ASTM D893 | % |
| 63 | pH Meter (with RA) | ||
| 64 | Pour Point | ASTM D92 | °C |
| 65 | Refractometer | ||
| 66 | Reserve Alkalinity (RA) | ||
| 67 | RPVOT | ||
| 68 | Shear Stability Index | ASTM D6278 | % |
| 69 | Soot % | % | |
| 70 | Strong Acid Number | mod. ASTM D664 | mg KOH/g |
| 71 | Sulphated Ash | wt % | |
| 72 | Sulphated Ash | ||
| 73 | TDS Meter / Conductivity Meter | ||
| 74 | TEOST 33C | ||
| 75 | TEOST-MHT | ||
| 76 | TGA | ||
| 77 | Turbiscan | ||
| 78 | Viscosity | mod. ASTM D445 | cSt |
| 79 | Viscosity Index | ASTM D2270 | no units |
| 80 | Water by Karl Fischer – Coulometric | mod. ASTM D6304C | % or ppm |